Minelab are pleased to announce the GOLD MONSTER 1000 metal detector will be available soon. Availability and prices are yet to be confirmed.
The GOLD MONSTER 1000 turns beginners into experts with fully automatic operation in an easy-to-use, high performance detector.
The GOLD MONSTER 1000 comes with a choice of coils, battery options and shaft configurations. If you are looking for super sensitive gold performance at a great price, then this is the detector you've been waiting for!
- Fully automatic operation
- Extra sensitive 45 kHz VLF performance
- Highly adaptable
- 2 search coils included
- Easy quick start
Gold Monster 1000 outperforms all other single frequency VLF gold detectors!
* When Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions.
Up until now, there has always been a compromise between frequency and sensitivity when optimising detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.
When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery!
Automatic noise cancel • Digital electronics • Auto ground balance • Faster processor • Automatic sensitivity
Minelab Gold Monster 1000 Metal Detector Specifications
||Ultra-wide dynamic range 45kHz VLF
||Gold (Iron reject), Deep All-Metal
||Gold Chance Indicator (high/low)
||Automatic (On start-up)
||Manual (1-10), Auto (11), Auto+(12)
|Detector Weight with 10" x 6" coil)
||1.33kg (excluding battery)
||Internal speaker or headphones 3.5mm
||GM 10 (10" x 6" Double-D), GM 05 (5" Double-D)
||Coils waterproof to 1m, Control Box rain/splash-proof
||Li-ion (included), 8 x AA Batteries (not included)
||2 years on control & coil
Shipping And Delivery
Miners Den Australia uses Australia Post to service all of Australia at the best possible price.
Miners Den Australia endeavours to have all products shipped within 24 hours of ordering for in stock products. Orders submitted and paid for before 11am will be sent out the same day.
If there is a delay or a product is unavailable our staff will personally contact you as soon as possible to make alternative arrangements.
Freight times will be dependent upon location and freight carrier chosen. Your delivery should arrive within 1 to 10 days dependant on your location.
Your order status to check when your order was shipped and tracking number can be viewed by logging into your account.