Locate coins, rings, treasure and gold with speed and accuracy. The PRO-FIND 25 is an essential part of your detecting tool kit.
The PRO-FIND 25 pinpointer allows you to accurately locate buried targets in holes, where a metal detector coil doesn’t fit. This results in smaller holes, less environmental disruption and faster target recovery time.
Proportional audio/vibration response
For greater accuracy the PRO-FIND 25 indicates the depth of buried targets with a proportional vibration and audio response. As the pinpointer probe gets closer to the target, the intensity of vibration and audio increases.
Narrow down the exact location of targets with the PRO-FIND 25's adjustable sensitivity. This can be increased to locate deep targets or decreased to precisely locate small targets.
Two mode operation
Select from two modes – Audio & Vibrate or Vibrate Only for silent searching.
Durable water resistant construction
Submersible probe end. The whole pinpointer can be washed under running water.
Probe side sensitivity
Probe side detection area (360°) allows targets to easily be located in the walls of the hole.
Auto power off
To save battery life, the PRO-FIND 25 switches off after eight minutes of inactivity.
LED flash light
Easily see targets when pinpointing in low light conditions and in deep holes.
Belt mounted holster to comfortably carry pinpointer.
VLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions.
Detector Interference Free technology
The advanced design of the PRO-FIND 25 removes false signals and noise, commonly associated with other pinpointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil's magnetic field.
Flat Price Shipping Australia Wide: $7.50 via regular Australia Post
|Length||9.3 in (237 mm)|
|Diameter||1.6 in (41 mm) base, 0.8 in (20 mm) probe|
|Weight with Battery||6.82 oz (193.5 g)|
|Battery||9 volt PP3 (not included)|
|Battery Life||30 hours nominal (alkaline battery)|
Posted by rod stevenson on 31st Oct 2013
it just saves so much time.Pin Pionter!
Posted by Rod Stevenson on 24th Oct 2013
All it needs is a lenyard
Posted by Unknown on 11th Sep 2013
Great item works well, only suggestion would be incorporating some kind of eyelet so a safety line could be attached to protect the finder from accidentally being knocked from the holster & lost.
Posted by Tony McGladrigan on 28th Jul 2013
Although I'm sure the Minelab PRO-FIND 25 will come into its own when used in soil or harder ground, I have found it really cuts down unnecessary digging in sand on beaches and has, therefore, saved my knees from getting so sore kneeling on sand to locate a target. I use a Minelab CTX 3030, and because it misses nothing, at ridiculous depths in wet or dry sand, I get to dig some very deep holes. Locating the find(s) quickly is essential and the PRO-FIND 25 has proved a must-have tool.
Posted by Peter on 15th Jul 2013
Quick and easy to use, saves a lot of time. Gets a little confused in very noisy ground with hot rocks.
Posted by Michael on 3rd Jul 2013
I have not as yet used my Minelab pinpointed as yet but on a test around the house the simplicity to use will make it very usefull in the field . In the vibrate mode it will be good for a discreit search
Posted by Des on 2nd Apr 2013
The minelab Pro Find 25 is so easy to use in so many ways, thanks for keeping it simple
Posted by Michael Gascoigne on 1st Apr 2013
Great little pinpointer. Its light and simple to use. Really sturdy and the sound and vibration levels are great. Love the little LED light that's built in. Great for low light conditions and nighttime. This unit has cut down my time on my knee's by heaps. Overall great unit couldn't be happier with it.