Walco Pick - Medium Gold Prospecting Pick
$140.00
Choose your coil. Keep the bonuses.
Build your AlgoForce E1500 Plus setup with the coil that suits your prospecting. Every Your Choice Pack includes the detector, a Cygnett ChargeUp Outback 20,000mAh power bank and four free bonus accessories. Add audio only if you need it.
Four free bonuses with every coil choice
- Miners Den AlgoForce E1500 Plus Screen & Control Box Cover
- Miners Den Digital Gold Prospecting Scales, 200g / 0.01g
- Pro-Series Prospectors Nugget Scoop
- Walco Small Gold Prospecting Pick
These bonuses are included automatically at no extra charge. The MD-21 Bluetooth Kit and neckband headphones are optional paid audio accessories.
Choose one coil
The pack starts at $2,834 with the Nugget Finder AUzzy 5" Round Mono Coil. Your pack includes one coil only. Selecting another coil replaces the standard AUzzy 5" coil. The prices below are the extra cost to swap coils.
- Nugget Finder AUzzy 5" Round Mono: standard coil — no extra cost
- Coiltek 10" x 5" Elite Max: swap to this coil for an extra $5
- Nugget Finder 8" x 6" Sadie Mk2: swap to this coil for an extra $20
- Coiltek 9" Elite Max: swap to this coil for an extra $35
- Coiltek 14" x 9" Elite Max: swap to this coil for an extra $65
- Nugget Finder 13" x 9" EVO2: swap to this coil for an extra $105
Smaller coils are easier to manoeuvre around rocks and scrub. Larger coils cover more ground per sweep and may suit larger targets in open areas. Depth and sensitivity vary with target size, ground mineralisation, settings and technique.
Optional audio
Use the detector's built-in speaker or add wired headphones. For a wireless setup, select both the Pro-Series MD-21 Bluetooth Kit and Pro-Series Low Latency Bluetooth Neckband Headphones. The neckband headphones require an MD-21 or another compatible low-latency transmitter connected to the detector; they do not connect directly to the E1500 Plus. Already own a compatible transmitter? You can select the neckband headphones on their own.
Practical gold-detecting features
The E1500 Plus uses Ultra-Fine pulse induction technology, with Ultra-Fine, Fine, Normal and Large detection modes. Automatic ground balance, a scrolling signal display and Beginner or Advanced interfaces help you adjust the detector for your ground. Conductive Target ID (0–99) is available in Pinpoint Mode; use it as a guide when assessing a target.
The detector uses compatible mono coils and a suitable 5V USB power supply capable of at least 3A. The power bank supplied in this pack provides your portable power source.
Water use: the control box is not water-resistant and must be kept dry. The included cover provides protection from general field wear; it does not make the control box waterproof. A Beach soil setting does not make the detector submersible. Follow the selected coil and power bank manufacturers' water-use limits.
Free standard shipping Australia-wide. Your final price includes your chosen coil, the power bank, all four bonuses and any paid audio options you select.
Manual and quick-start guide — V4.0.0
These guides cover software version V4.0.0. Check the software version installed on your detector; an update may be needed to use all the features described. See page 29 of the user manual for software upgrade instructions.
